Plastic Mold Steels
Pre-manufactured Porcerax II Vent Pins
Ready to use, these “self venting” inserts are designed to be inserted in
problem venting areas. These pins uniquely allow gasses to pass right through
the pins but not plastic resin.
Available in 7 or 20 micron average pore sizes, these ready-to-use 35 to 38
HRc inserts are precision ground for press fitting, EDM machined to re-open the
pores and then ultrasonic & high pressure cleaned for optimum venting.
(Other sizes are available upon request)
.250 x diameter + .0004 / - 0 x 1/2" long $70.00 per piece
.375 x diameter + .0004 / - 0 x 1/2" long $75.00 per piece
.375 x diameter + .0004 / - 0 x 1" long $110.00 per piece
.1875" diameter +.0004/-0 x 1/4" long $50.00 per piece
.375" diameter +.0004/-0 x 5/16" long $65.00 per piece
It is imperative that anyone coming into contact with Porcerax II during the
mold building or molding operations understand the characteristics and
sensitivity of this material. Any questions should be directed to International
Mold Steel at 1.800.625.6653.
All technical and engineering data and suggested procedures, specifications and
applications contained in this publication are for general information only.
Sintokogio, Ltd., International Mold Steel and/or their distributors disclaim
any and all express or implied warranties of merchantability, suitability for
any particular purpose or use, or freedom from infringement of any patent,
trademark or copyright. Porcerax II® is a registered trademark of International
Mold Steel, Inc. and Sintokogio, Ltd..