GRAPHIC: Link to International Mold Steel welcome page.
CONTACT US  
800.625.6653  
 
Home | About Us | What's New | Webinars | Videos | Contact Us
 

HOME --> COLD WORK DIE STEELS --> TOOLOX 44 --> SPECIFICATIONS

Cold Work Die Steels

TOOLOX44

Specifications:

Hardness

Hardness range 41 - 47 HRC

Impact toughness

Test temperature F 68

Impact energy, Charpy-V-test for plate, direction; Guaranteed minimum Ft. lbs. 14

Milling

At cutting speed of 140m/mm, feed 0.15mm and 10min effective machining time using Sandvik Coromil 200 and inserts GC 1025, we guarantee maximum edge wear of 0.3mm

Etching

Toolox 44 fulfills the etching requirements of NADCA 207-2003

Dimensions

Toolox 44 is supplied as plate in thickness between .200" - 5 1/8"

Heat treatment

Toolox 44 is not intended for further heat treatments. If Toolox 44 is heated above 590 C, no guarantees for the properties of the steel can be given.

Nitriding/coating

Below temperature <590 C / 1094 F

TOOLOX44

Overview

Recommended Reading

Specifications

Usages

Machining

Testimonials

 


Click here for
Expert machining
advice on drilling
TOOLOX 44.

 


Presentation on
Drilling and Tapping
Toolox44

 

 
 
  International Mold Steel, Inc. 
6796 Powerline Drive 
Florence, KY 41042 USA 
Toll Free: 800.625.6653
Tel: 859.342.6000
Fax: 859.342.6006
Sales E-mail: salesdesk@imsteel.com
Literature E-mail: info@imsteel.com
Web: www.imsteel.com


www.imsteel.com