GRAPHIC: Link to International Mold Steel welcome page.
CONTACT US  
800.625.6653  
 
Home | About Us | What's New | Webinars | Videos | Contact Us
 

HOME --> COLD WORK DIE STEELS --> TOOLOX 44 --> MACHINING

Cold Work Die Steels

TOOLOX44

Machining:

Toolox 44 can be machined on conventional machines. It is important that sharp tools are used with a positive cutting angle and that vibration is avoided. Use the following recommendations as guidelines and the starting point for your own evaluation of best practice. 

Recommended preheat temperature when gas cutting and welding Minimum 250 C

Recommended stress relief annealing (after slow cooling to room temperature ) after gas cutting and welding 580 C

TOOLOX44

Overview

Recommended Reading

Specifications

Usages

Machining

Testimonials

 


Click here for
Expert machining
advice on drilling
TOOLOX 44.

 


Presentation on
Drilling and Tapping
Toolox44

 

 
 
  International Mold Steel, Inc. 
6796 Powerline Drive 
Florence, KY 41042 USA 
Toll Free: 800.625.6653
Tel: 859.342.6000
Fax: 859.342.6006
Sales E-mail: salesdesk@imsteel.com
Literature E-mail: info@imsteel.com
Web: www.imsteel.com


www.imsteel.com